|
Look for links to printable pdf
literature in equipment specifications sections, above in this column, & on
site map.
| |
|
New! |
MistBuster® 500 |
|
HIGH EFFICIENCY MIST & SMOKE
COLLECTOR
(additional MistBuster models
listed on left) |
|
 |
|
|
|
Ideal for petroleum, synthetic, and
water soluble machining fluids. |
The new MistBuster® 500 is a
self-contained mist removal system designed to capture mist and smoke from metal
working applications in industry. The MistBuster® can be direct
mounted to machine tools or ducted using optional plenums and flex hose. The
MistBuster is the superior alternative to conventional centrifugal and
media-type systems.
MistBuster®
Demonstration Video
(Free
RealPlayer®)
MistBuster 500
works best on enclosed machine tool
applications where the open area is no more than 3-4 sqft
and coolant pressures are below 1000 psi.
For pressures above 1000 psi we suggest using our
MistBuster 850.
Over 1200-1500 psi use
MistBuster
2000.
If you are machining cast iron, please consider our
MistBuster Infinity.
BENEFITS
-
Clean Air
— Eliminates the haze
associated with most metal working operations.
-
Health
— Reduces exposure to
machining fluid mist which has been associated with respiratory disorders
and skin ailments.
-
Safety
— Reduces the risk of
accidents caused by slippery surfaces.
-
Machine Fluid Savings
— The MistBuster®
collector collects and returns the machine fluid to your machine rather
than venting it to the atmosphere.
- Cleaning Cost
Savings —
Uncontrolled machine fluid mist will soil machinery, floors and ceilings.
|
FEATURES
-
High Efficiency Mist and Smoke Removal
-Independent laboratory
tests confirm up to 97% efficiency.
-
Low Operating Costs —The MistBuster®
requires less than 230 watts of power to operate.
-
Low Maintenance Costs
— The MistBuster 500
has no costly media filters to replace.
-
Easy Installation
— The MistBuster can be
mounted directly to the machine tool, pedestal, wall or ceiling.
|
MistBuster®
FEATURES & SPECIFICATIONS
(Click Here for Printable
Product Literature)
(Click
Here for Printable Operation Manual)
MistBuster 500 works best on enclosed machine tool
applications where the open area is no more than 3-4 sqft
and coolant pressures are below 1000 psi.
For pressures above 1000 psi we suggest using our
MistBuster 850.
Over 1200-1500 psi use
MistBuster 2000.
If you are machining cast iron, please consider our
MistBuster Infinity.
Principles of Operation:
| Polluted air is drawn through the first stage mechanical
mist impingers. These impingers are designed to remove the larger mist
droplets and particles. The remaining sub-micron mist droplets and particles
are removed in the second stage through the process of electrostatic
precipitation (ESP). The ESP provides an intense electrical charge on the
remaining contaminants through the ionizing field. The collection cell,
which works much like a magnet, attracts and removes the charged mist
droplets from the air stream. To optimize efficiency, an aluminum
post-filter entraps particles, which may have been agglomerated on the cell
plates. Clean air is then returned to the room. |
 |
- ADDITIONAL FEATURES:
-
OPTIONAL
ACCESSORIES:
|
 |
|
SPECIFICATIONS: |
|
DIMENSIONS: |
|
Cabinet 25" L x
13 1/2" W x 18 3/8" H |
|
INLET OPENING: |
|
16.62" x 9.08" |
|
WEIGHT: |
|
71 lbs.
installed weight
82 lbs. shipping weight Ships UPS |
|
CABINET: |
|
16 gauge steel
cabinet with a chemical resistant baked enamel, ivory texture finish |
|
AIRFLOW: |
|
50-500 cfm @
0.6" wg top discharge |
|
EFFICIENCY: |
|
Up to 97%
efficiency per ASHRAE 52.1 |
|
FILTRATION: |
|
1st
Stage 4"thick aluminum mist impingers.
2nd Stage ESP cell 105.8 sq. ft. of surface area. Minimum
voltage gradient is 20,000 volts per inch
3rd Stage 1" thick aluminum mesh
4th Stage Optional HEPA filter 99.97% efficient |
|
POWER SUPPLY: |
|
Self-regulating,
dual voltage solid-state power supply. |
|
MOTORIZED IMPELLER: |
|
Backward
curved, vibration-free, direct drive rated at 710 cfm
@ 0" wg. |
|
POWER: |
|
115 Vac, 60Hz, 2
amps 230 Vac, 60 Hz, lamp |
|
POWER CORD: |
|
Ten-foot power
cord with standard molded plug. |
|
SOUND LEVELS: |
|
74 dBA @3'
70 dBA @6’ |
- Comparison
with
Centrifugal
Type
Mist
Collectors
- Price
- Other
machines to consider in this category
         
Click Here for
more information
|
